Jeep

This guy used natural LED strips to light up the bottom of his vehicle.  They make the vehicle look amazing in the evening and can even be remaining on when remaining because they run for time off of the Jeep's 12V power supply.
Website:http://www.ledstripbox.com

 For the vehicle shown, he used about 13 legs of our natural water resistant IP68 fold remove.  It was cut into 5 areas, with 2 areas on each side of the vehicle, one on the back, one in the top side under the fender, and a short area above the bbq grill.  The areas were all linked together with 2-3 base bouncer cable soldered onto the end of the pieces (and then protected with water resistant silicon).  On the within of the vehicle he select to use 4 natural SMD segments, putting 2 under the sprint and one behind each chair.

      The LED lighting style were then immediate wired to 2 toggle changes placed within the jeep- one managing the outside lighting style one for the within lighting style.  Another choice for lighting style management would be one of our PWM Dimmers or Key chain handheld distant management.  If you are going to use RGB pieces we suggest our Sound RF Key chain Remote as it has a designed in Mic and can make the shades modify to the defeat of the songs.